Canon POWERSHOT SD3500 IS Digital ELPH User Manual page 11

Safety Precautions
Do not aim the camera at bright light sources (the sun, etc.).
Doing so may cause malfunctions or damage the image sensor.
allow dust or sand to enter the camera,
This may cause the camera to malfunction.
This is due to the high intensity of the flash burning dust and foreign materials stuck to the
front of the unit. Please use a cotton swab to remove dirt, dust or other foreign matter from
the flash to prevent heat build-up and damage to the unit.
Unplug the battery charger from the power outlet after recharging is complete,
or when you are not using it.
Do not pJaee anything, such as cJoth on top of the battery charger white it is
charging.
Leaving the unit plugged in for a long period of time may cause it to overheat and distort,
resulting in fire.
If the battery is ]eft inside the camera, damage caused by leakage may occur.
Before you discard batteries, cover the terminals with tape or other insulators.
Contacting other metal materials in waste containers may lead to fire or explosions.
Do not place the battery near pets.
Pets biting the battery could cause leakage, overheating or explosion, resulting in fire or
injuries.
:: 6_ _t _i__o_ wi_ _ _o_: ........................................
Doing so may cause malfunctions or damage the LCD monitor.
contact with the LCB monitor.
Do not attach accessories to the strap.
Doing so may cause malfunctions or damage the LCD monitor.
@@@
11