Canon POWERSHOT SD3500 IS Digital ELPH User Manual page 96

Changing the Color and Shooting
You can swap one color in an image for another when recording it, You can
only swap one color,
Choose !s.
Fotlow Steps 1 = 2 on p= 54 to choose iS=
2 Touch /.
.............The unchanged image and the Color
Swap image wil_ both display.
The default setting is to change green to
gray.
Specify the color to be swapped.
Position the center frame so it is filled with
the color you want and touch the frame at
the bottom left of the screen,
The specified color will be recorded,
Specify t.etarget color.
Position the center frame so it is filled with
the color you want and touch the frame at
the bottom right of the screen.
The specified color will be recorded,
_ Specify the range of colors to be
......swapped.
Touch _.v to change the range of cotors
to be retained.
Choose a negative value to limit the range
of colors. Choose a positive value to
extend the range of colors to similar colors.
Touching _) restores the shooting screen=
96