Canon POWERSHOT G9 User Manual page 149

Advanced Shooting Functions
1147
Saving Original Images
Not only can you save images with altered colors when shooting still
images with the Color Accent or Color Swap modes, but you can
also choose to save the original images (before the color change).
1 Select [Save Original],
1. Press the (_.,,, button.
2. Use the 41. or _1. button to select
[Save Original] in the [] menu.
2
Make settings•
1. Use the ÷ or "k button to select
[On] or [Off].
2. Press the O button.
MENU
• If [On] is selected, the images will
be saved as consecutive file
numbers. The original image will be the lower file number,
while the image shot in Color Accent or Color Swap mode will
be the higher file number.
[Save Original] is set to [On]
Only the image set with Color Accent or Color Swap is
displayed on the LCD monitor during shooting.
The image displayed on the LCD monitor immediately after
shooting is the one shot with Color Accent or Color Swap.
As erasing the image at this time will cause the original
image to be erased at the same time, be careful.
As two images are saved with each shot, the number of
recordable shots displayed on the LCD monitor will be half
the number that is displayed when [Save Original] is set to
[Off].