Shooting In A My Colors Mode - Canon POWERSHOT G9 User Manual

1401
Advanced Shooting Functions
• You are recommended to set the shooting mode to P and
the exposure compensation setting to [+0] before setting a
custom white balance. The correct white balance may not
be obtained when the exposure setting is incorrect (image
appears completely black or white).
• Shoot with the same settings as when reading the white
balance data. If the settings differ, the optimal white
balance may not be set. In particular, the following should
not be changed.
- ISO Speed
- Flash: Setting the flash to on or off is recommended. If
the flash fires when reading the white balance data with
the flash set to Auto, make sure that you also use the
flash when you shoot.
• Since the white balance data cannot be read in Stitch
Assist mode, preset the white balance in another shooting
mode beforehand.
• The white balance data is retained even after the camera
power is turned off.
IShooting in a My Colors Mode []
[] See Functions Available in Each Shooting Mode (p. 270).
* Cannotbe set in [] and [] modes.
You can change the look of an image when it is shot.
[] My Colors Off Records normally.
_J Vivid Emphasizes the contrast and color saturation to
record bold colors.
Tones down the contrast and color saturation to record
[] Neutral
neutral hues.
[] Sepia Records in sepia tones.
[] B/W Records in black and white.