Canon XL 1A Instruction Manual page 67

Digital video camcorder
Table of Contents

Advertisement

Viewfinder
(removal)
• You may wish to remove the viewfinder
for
storage or transport.
Remove
the viewfinder
cable from the socket at
the front of the camera body. Loosen the locking
screw that holds the unit in place and slide the
viewfinder
unit off the bracket.
Viewfinder
(brightness)
• Adjust the brightness
of the display by turning
the BRIGHT
screw. You can reveal the screw on
the under side of the viewfinder
by pulling back
the small screw cover.
Camera
body and lens
• Use a soft, dry cloth to clean the camera body or lens. Never use chemically
treated cloth or volatile
solvents
such as paint thinner.
Video heads
• When mosaic-like
noise appears
on the playback
picture, the video heads may
be dirty. When the video heads are badly contaminated,
the camera may show a
blank blue screen.
Clean the video heads using Canon's
DVM-CL
Digital Video Head Cleaning
Cassette.
If the "noise"
remains, repeat the cleaning
(up to maximum
of five
times).
• Do not use a wet-type
cleaning
cassette,
as this can cause damage.
Power
sources
• You can use the compact
power adapter
to operate your camera and charge battery packs in any country
where the electricity
supply is between
110 and 240 V AC, 50/60 Hz. Contact your Canon dealer for
information
about plug adapters
for overseas use.
TV playback
• Although
you can always play back your recordings
in the viewfinder,
your camera can only be connected
to TVs which use its NTSC system. This TV system is used in the following
countries:
American
Samoa, Bahama,
Barbados,
Bermuda,
Bolivia, Canada,
Chile, Columbia,
Costa Rica, Cuba,
Ecuador,
E1 Salvadoc
Guam, Guatemala,
Greenland,
Haiti, Honduras,
Jamaica,
Japan, Korea, Mexico,
Micronesia,
Myanmar,
Nicaragua,
Panama, Peru, Philippines,
Puerto Rico, Saint Lucia, Surinam,
Taiwan,
Trinidad
and Yobago, USA, Venezuela.
67

Advertisement

Table of Contents
loading

Table of Contents