Table of Contents
Advertisement
Before operating
your camera,
you will need to use the power adapter to:
provide
power
from an AC outlet
or
charge
a battery
pack
Notes:
• The power adapter converts
current from a household
power socket (100-240
V AC, 50/60 Hz) to the DC
current used by your camera.
• If the adapter is used next to a TV, it may cause the TV to emit noise -- move the adapter away flom the
TV or the antenna
cable.
"u
Use the power adapter and the DC coupler to provide
your camera with instant power flom an AC outlet.
1. Attach
the DC coupler
to the camera.
• Align the triangle
on the DC coupler with the line on the camera.
• Slide the coupler up in the direction
of the arrow, until it clicks into place.
2. Connect
the DC coupler
to the adapter.
3. Plug
the adapter
into
an AC outlet.
4. Detach
the DC coupler
after
use.
• Press and hold the BATT. RELEASE
button, while you slide the coupler down.
• Always
turn the camera off before removing
the power source.
When replacement
or repair of any product
including
power supply is required,
please return it to the
nearest
authorized
Canon Service Center and have it repaired
or replaced
with the same number
product
or equivalent.
13
Advertisement
Table of Contents
