GE Nautilus GSD4500 Series Owner's Manual page 23

Problem
Dishes don't dry
Control panel
responded to inputs
but dishwasher never
filled with water
Dishwasher won't run
Steam
Possible Causes
Low inlet water
temperature
Rinse agent dispenser
is empty
Door latch may not be
properly seated
Fuse is blown, or the
circuit breaker tripped
This is normal
What To Do
Make sure inlet water
•
temperature is correct
(see page 11).
Select HI TEMP RINSE
•
and/or HEATED DRY.
Check the rinse agent
•
dispenser.
Call for service.
•
Replace fuse or reset
•
circuit breaker. Remove
any other appliances from
the circuit.
Try resetting the
•
START/RESET pad.
Steam comes through
•
the vent by the door latch
during drying and when
water is being pumped out.
23