Flash Exposure Compensation/Bracketing - Canon EOS 5D MARK III Instruction Manual

• _]]] Setting the Flash "_
®_ Flash exposure compensation
The same setting as "Flash exposure
compensation" on page 188 can be set.
For details, refer to the Speedfite's
instruction manual.
_ Flash exposure bracketing
While the flash output is changed
automatically, three shots are taken.
For details on FEB (Flash Exposure
Bracketing), refer to the Speedfite's
instruction manual.
dh
_Hr When using second-curtain synchronization, set the shutter speed to 1/25
sec. or slower. If the shutter speed is 1/30 sec. or faster, first-curtain
synchronization will be applied even if [Second-curtain synchronizaUon]
is set.
By selecting [Clear flash settings], you can revert the flash settings to
their defaults.
With an EX-series Speedlite not compatible with flash function settings,
you can only set the following: [Flash firing], [E-TTL II meter.], and
[Flash exposure compensation] under [Flash function settings].
([Shutter synchronization] can also be se_ with certain EX-series
Speedlites,)
If flash exposure compensation is set with the Speedlite, you cannot se[
the flash exposure compensation on the camera twith the <ISO._>
button or flash function settings). If it is set with both the camera and
Speedlite. the Speedlite's setting overrides the camera's.
195