About The Information Display - Canon EOS 5D MARK III Instruction Manual

r_ Shooting with the LCD Monitor
AbouttheI,formatJon uisplay
_ Each time you press the <INFO,> button, the information display will
change.
AF mode
• AF_ : Live mode
• AF % : Face detection Live
mode
• A_: Quick mode
Auto Lighting Optimizer
........... Eye-Fi card transmission status
point (Live mode)
........ GPS connection indicator
Shootinc
White
Picture
Card
playback
compensation
AE lock
Flash-ready .................... !
Image-recording quality
Shutter speed _
HDR shootinc
Multiple exposures
Aperture
[]
Digital compass
FEB
Magnification/
Magnifying position
Exposure
simulation
Battery check
priority
LAEB
L, ISO speed
Possible shots
Exposure level
The histogram can be displayed when [Expo. simulation: Enable] is set
(p.205).
You can display the electronic level Dy pressing the <INFO.> button i p.6O}
Note thai if the AF mode is set tc [_ Live mode] or the camera =sconnected
[o a TV set with an HDMI cable, the electronic level cannot be displayed.
When <_> is displayed in white, it indicates that the Live View image
brightness is close to what the captured image will look like.
4_ If < _ > is blinkin£ it indicates that the Live View image is not being
displayed at the suitable brightness due to low- or bdght-light conditions.
However. the actual image recorded will reflect the exposure setting.
If flash is used or bulb is set. the <_> icon and histogram will be
grayed out (for your reference). The histogram may not be properly
displayed in low- or bright-light conditions.
200