Canon POWERSHOT A60 User Manual page 99

3 Shoot the image.
The correct exposure has been set if the shutter speed and
aperture value show in white.
• If the shutter speed shows in red on the LCD monitor,
the image is under exposed (insufficient light) or
overexposed (too much light). Adjust the aperture value
using the left and right buttons until the shutter speed
display turns white.
• Some aperture values may not be available with certain
zoom positions.
• For functions available in this mode, see page 224.
• Please note that camera shake becomes a factor at low
shutter speeds. If the camera shake warning [] appears
in the LCD monitor, secure the camera to a tripod before
shooting.
• In this mode, the shutter speed range with synchronized
flash is 1t60 second to 11500 second. The aperture
value setting may therefore be changed automatically to
match the synchronized flash speed even if its value
was set previously.
Aperture Value Display
The larger the aperture value, the smaller the lens aperture.
F2.8 F3.2 F3.5 F40 F45 F4.8 F5.0 F5.6 F6.3 F71 F8.0
• For the correlation between aperture value and shutter
speed, see page 93.
95
03
C
O
©
CO