iil!liiiii!,
!!i!!ii!
,4
Aim the camera at the white paper or
cloth, or gray card and press the SET
button.
• Aim the camera so that the white paper or cloth, or gray
card, completely
fills the frame on the LCD monitor
screen or the entire viewfinder
before pressing the SET
button. When you press the SET button, the camera reads
the white balance data.
• You can shoot the image right after selecting
settings by
pressing the shutter button. This screen will appear
again, once the image is shot.
Press the FUNC. button.
6
Shoot
the image.
106