Canon POWERSHOT A60 User Manual page 170

iil!liiiii!, !!i!!ii!
• No image will appear on the LCD monitor when the
camera is connected to a TV monitor,
• The video output signal can be switched (NTSC or PAL)
to accommodate different regional standards (p. I81),
The default setting will vary between regions.
NT$C: Japan, U.S,A,, Canada, Taiwan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc,
If an incorrect video system is set, the output image will
not display properly,
• If the TV is a stereo model, you can plug the audio plug
into either the left or right Audio In jack. Please refer to
the TWs manual for details,
A TV set cannot be used in _ mode.
166