Canon POWERSHOT D20 User Manual page 83

Before using an EyeoFi card, always confirm that local use is permitted (p. 3).
hserting a prepared EyeoFi card enables automatic wireless transfer of
images to a computer or uploading to a photo-sharing website.
Bmages are transferred by the EyeoFi card. Refer to the card's user manual or
contact the manufacturer for instructions on preparing and using cards or
resolving transfer proMems.
(_) When using an Eye-Fi card, keep the following points in mind.
Cards may continue to transmit radio waves even when [Eye-Fi
trans.] is set to [Disable] (p. 191 ). Remove the EyeoFi card before
entering hospitals, aircraft, or other areas where transmission is
prohibited.
When troubleshooting image transfer issues, check the card and
computer settings. For details, refer to the card's user manual.
Poor wireless connections may cause image transfer to take a long
time, and transfer may be interrupted in some cases.
EyeoFi cards may become hot, due to their transfer functions.
Battery power will be consumed faster than in norma_ use.
Camera operation may become sluggish. To resolve this, try setting
[EyeoFi trans.] to [Disable].
Connection status of EyeoFi cards in the camera can be checked on the
shooting screen (in regular information display mode) or playback screen (in
simple information display mode).
(Blinking white) Connecting
'9 (Animated) Transfer in progress
Interrupted
Not communicating
Error acquiring Eye-F! card information (Restart the camera.
Repeated display of this icon may indicate a probIem with the
card.)
Images labeled with a [] icon have been transferred.
190