Canon POWERSHOT D20 User Manual page 12

iiiiiiiii::
iiiiiiiii_
iiiiiiiii_
F,as. iiiiiiiii
Access the setting screen.
Press the
MENU
button, choose [IS Settings] on
the O tab (p. 42).
Configure the setting.
Choose [IS Mode], and then choose the
desired option (p. 42).
Opiimai image siabiiizaiion {or ihe
Continuous shooting conditions is automatically
apptied (intelligent iS) (p. 60).
Shoot Only* image stabilization is active only at the
moment of shooting.
Off Deactivates image stabilization.
*Thesetting is changed to [Continuous]for movie recording.
(_ Bfimage stabilization cannot prevent camera shake, mount the
camera on a tripod or take other measures to hoid it still. In this case,
set [BS Mode] to [Off].
M_ii_s!iiiililililililililililililililililili
_ Deactivating Powered iS
Powered IS reduces slow camera shake that may occur when recording
telephoto movies. However, this option may not produce the expected results
when used for the stronger camera shake that may occur when shooting
while walking or when moving the camera to match subject movement. In this
case, set Powered iS to [Off].
Follow the steps in "Changing the IS Mode
Settings" (p. 119) to access the [IS Settings]
screen.
Choose [Powered IS], and then choose [Off]
(p. 42).
(_ [Powered IS] settings are not applied when [IS Mode] is set to [Off].
119