Canon POWERSHOT D20 User Manual page 38

tmage Categories
Choose a category.
Press the _.v buttons to choose a category,
and then press the @ button. _/ is displayed.
To cancel selection, press the @ button
again. _ is no longer displayed.
Repeat tMs process to choose additiona!
images.
Finish the setup process.
Press the M E N U button_ A confirmation
message is displayed. Press the 4_, buttons
to choose [OK], and then press the @
button.
(_ Images will not be assigned to a category if you switch to Shooting mode
or turn the camera off before finishing the setup process in step 4.
_ Selecting a Range
Choose [Select Range].
Following step 2 on p. 144, choose [Select
Range] and press the _ button.
Choose images.
Follow steps 2 - 3 on p. 136 to specify
images_
Choose a category.
Press the v button to choose the type of
image, and then press the _ buttons to
choose a category.
Finish the setup process.
Press the v button to choose [Select], and
then press the _ button.
145