Canon EOS 60D Instruction Manual page 74

Error Codes
Error No. If there is a problem with the camera, an
error message will appear. Follow the on-
screen instructions.
Countermeasures
Communications between the camera and lens is faulty. Clean the
lens contacts.
01
,,,_; C lean the electrica! contacts on the camera and lens and use a
Canon lens (p.13, 16).
Card cannot be accessed. Reinsert/change card or format card
with camera.
02
,,,_Remove and insert the card again, replace the card, or format the
card (p.32, 48).
Cannot save images because card is full. Replace card.
04 ,._ Replace the card, erase unnecessary images, or format the card
(p.32, 48, 215).
The built-in flash could not be raised. Turn the camera offand on
05 again.
,,,_Operate the power switch (p.28).
Sensor cleaning is not possible. Turn the camera off and on again.
06
_ Operate the power switch (p.28).
10, 20, Shooting is not possible due to an error. Turn the camera off and
30, 40, on again or re-install the battery.
50, 60, _, Operate the power switch, remove and install the battery pack
70, 80 again, or use a Canon lens (p.26, 28).
* If the error still persists, write down the error No. and contact your nearest
Canon Service Center.
291