Canon EOS 60D Instruction Manual page 67

Troubleshooting Guide
Theaccess lampstill blinks evenwhenthe powerSwitch is setto <OFF >i
® If the power is turned off while an image is being recorded to the card,
the access lamp will still continue to light/blink for a few seconds.
When the image recording is completed, the power will turn off
automatically.
The battery becomes exhausted quickly.
® Use a fully-charged battery pack (p.24).
® The battery performance might have degraded. See the [_': Battery
info.] menu option to check the battery's performance level (p.268). If
the battery performance is poor, replace the battery pack with a new
one.
¢_ if you keep displaying the Quick Control screen (p.44) or do Live View
shooting or movie shooting (p.151, 171) for a prolonged period, the
number of possible shots will decrease.
The camera turns off by itself.
¢_ Auto power off is in effect. If you do not want auto power off to take
effect, set [_ Auto power off] to [Off].
No images carl be shot nor recorded,
® The card is not properly inserted (p.32).
® If the card is full, replace the card or delete unnecessary images to
make room (p.32, 215).
® If you try to focus in the One-Shot AF mode while the focus
confirmation light <O> in the viewfinder blinks, a picture cannot be
taken. Press the shutter button halfway again to focus, or focus
manually (p.40, 80).
® Slide the card's write-protect switch to the Write/Erase setting (p.32).
284