Planning For Installation; Installing The Remote Scan Driver; Installing From Client Utilities Cd-Rom; Chapter 8 Remote Scan - Toshiba e-STUDIO 282 Scanning Manual

8 Remote Scan
Installing Remote Scan Driver
This section describes how to install the Remote Scan driver.

Planning for Installation

This equipment provides a Remote Scan driver that allows users to operate scanning remotely
from a Windows computer and import the scanned images into a TWAIN-compliant application.
Originals
The Remote Scan driver can connect to this equipment over a TCP/IP network.
System Requirements
The Remote Scan driver is available for following environments:
OS
Windows 2000 Service Pack 4
Windows XP Service Pack 1/Service Pack 2
Windows Vista
Windows Server 2003
Required Software
TWAIN-compliant application
Microsoft Internet Explorer 5.5 Service Pack 2 or later (when IPv4 is used)
Microsoft Internet Explorer 7.0 or later (when IPv6 is used)
Recommended memories
Scanning of the document in the black mode: 256 MB

Installing the Remote Scan Driver

You can install the Remote Scan driver from the Client Utilities CD-ROM or TopAccess.

Installing from Client Utilities CD-ROM

This section describes how to install the Remote Scan driver.
Installing the Remote Scan driver using the installer
This procedure describes an installation on Windows XP. The procedure is the same when
other versions of Windows are used.
118 Installing Remote Scan Driver
Connecting over TCP/IP Network
Remotely operate scanning
using Remote Scan driver
Retrieve scanned images
into an application
Windows 2000
Windows XP
Windows Vista
Windows Server 2003