Configuring Discovery Settings - Toshiba e-STUDIO 282 Scanning Manual

8 Remote Scan
2
Enter each item to specify the network address of the device and
click [OK].
IPV4 — Select this to search for devices set with an IPv4 address.
IPV6 — Select this to search for devices set with an IPv6 address.
IPX Address — This is disabled because the Remote Scan driver does not support the
IPX/SPX connection.
Name — Enter the printer name.
Location — Enter the location of the printer.
You must enter "Name" and "IP Address".
3
The entered printer is added in the list. Select the printers that you
want to monitor from the list and click [OK].
You are connected to the selected device.

— Configuring Discovery Settings

You can configure the discovery settings.
126 Scanning Remotely Using Remote Scan Driver