Table of Contents
Advertisement
68
6.5
PTZ Address Setting
Some protocols support software address settings. The following section explains these settings.
1
RX Address 1 – This option was added for a particular line of
receivers that support 2 ID addresses. This is the first RX address.
RX Address 2 – This option was added for a particular line of
2
receivers that support 2 ID addresses. This is the second RX
address.
3
PT Driver Address – This option is for specifying the PTZ ID
address that the PTZ is set to. This option must be set correctly in
order for the DVR to communicate with the PTZ. This option can be
beneficial when large amounts of PTZ are chained together.
4
Previous ID – This option was added for a particular line of
receivers that support 2 ID addresses. This option displays the
current RX address ID.
5
New ID– This option was added for a particular line of receivers that support 2 ID addresses. This option is for
entering a new RX address ID.
6
Set ID – This option was added for a particular line of receivers that support 2 ID addresses. This option is for
setting the new RX address.
6.6
Accessing PTZ Menu's
Some protocols support the ability to access the Internal PTZ Onscreen Menu
1
Camera Menu – This option opens the PTZ Camera menu.
2
Select – This option selects an item on the Onscreen menu.
3
Close – This option closes the PTZ Onscreen menu.
4
Up / Down – The Up and Down buttons on the PTZ controller
move through the PTZ menu options.
5
Left / Right – The Left and Right buttons on the PTZ controller
move through the PTZ menu options and/or highlight options.
Since every PTZ camera is different, the functions of these options can
vary slightly.
The Surveillix DVR provides an easy way to access the cameras
options. For explanations of what those options are please refer to the
manual that came with your camera
1
2
3
1
2
3
4
5
4
5
6
Advertisement
Table of Contents
