Table of Contents
Advertisement
4.13
Adjusting the Time and Date
To adjust the Time and Date follow these steps:
3)
Begin by exiting to Windows. Do this by pressing the EXIT button from the Main Display Screen and selecting
Restart in Windows Mode. (See Section 3.3)
4)
Open Windows Explorer. Do this by right-clicking on the My Computer Icon (located on the top left hand corner of
the Desktop) and select Explore.
5)
Double click on CONTROL PANEL to open it. If you do not see CONTROL PANEL listed, double-click MY
COMPUTER to expand the folder tree.
6)
Double Click on DATE/TIME inside Control Panel. (See Figure 4.10a)
7)
Adjust the Date and Time.
8)
When finished, close all open windows and restart the DVR unit. DO this by pressing the START button (Located
on the lower left hand side of the Desktop) and selecting SHUT DOWN.
47
Advertisement
Table of Contents
