Optional Installation Parts - Toshiba RAS-B10EKVP-E Service Manual

10-2.Optional Parts, Accesories and Tools

Optional Installation Parts

Part Code
Y
Z
Attachment bolt arrangement of outdoor unit
• Secure the outdoor unit with the attachment bolts and nuts if the unit is
likely to be exposed to a strong wind.
• Use 8 mm or 10 mm anchor bolts and nuts.
If it is necessary to drain the defrost water, attach drain nipple to the
base plate of the outdoor unit before installing it.
Accessory and Installation Parts
Part No. Part name (Q'ty)
a
Installation plate x 1
b
Wireless remote control x 1
c
Battery x 2
Others Name
Owner's manual (Indoor unit)
Installation manual (Indoor unit)
Installation manual (Outdoor unit)
Specifications (Outdoor unit)
Parts name
Refrigerant piping
Indoor unit name
10, 13
16
Shield pipe (for extension drain hose) (polyethylene foam, 6 mm thick)
Part No.
d
e
f
This model is not equipped with an
extension drain hose.
Option:
• For the extension drain hose, use the
optionally available RB-821SW or a
commercially available one.
• Use the following parts for installaion
of B16EKVP-E, M16EKVP-E.
RB-M34EE Expander ( 9.52
Liquid side
(Outer diameter)
6.35 mm
6.35 mm
Elongated drain
hole
(j)
Part name (Q'ty)
Remote control holder x 1
Zeolite-plus filter x 1
Plasma pure filter x 1
Parts name
12.7)
– 61 –
Gas side
(Outer diameter)
9.52 mm
12.7 mm
Suction side
Drain hole
Diffuser
Part No. Part name (Q'ty)
g
Mounting screw
4 x 25L x 6
Remote control holder
h
mounting screw
3.1 x 16L x 2
i
Drain nipple* x 1
(Heat pump models only)
j
Water-proof rubber cap* x 2
(Heat pump models only)
Parts marked with asterisk (*) are packaged with the
outdoor unit.
Q'ty
1 ea.
1
(i)