Energys Star Compliance - Epson 400 User Manual

Once you install an ink cartridge, do not open the clamp or
remove the cartridge except to replace it with a new one.
The cartridge may become unusable otherwise.
Install the ink cartridge immediately after you remove it
from its package. Leaving the cartridge unpacked for a long
time before use may result in reduced print quality.
Do not use an ink cartridge beyond the date printed on the
cartridge carton. For best results, use up the ink cartridges
within six months of installing them.
Do not shake an ink cartridge; this can cause leakage.
Always turn the printer off using the
2
power light flashes until the print head is capped, which
means it is at rest in the far right position. Do not unplug
the printer or turn off the power to the outlet until the
power light stops flashing. The printer caps the print head
when no data is received for several seconds.
Before transporting the printer, make sure the print head is
capped (in the far right position) and the ink cartridges are
in place.
E
NERGY
As an
determined that this product meets the
S
TAR guidelines for energy efficiency.
The International
is a voluntary partnership with the computer and office
equipment industry to promote the introduction of
energy-efficient personal computers, monitors, printers, fax
machines, and copiers in an effort to reduce air pollution
caused by power generation.
S
TAR Compliance
E S
NERGY TAR Partner, EPSON has
E S
NERGY TAR Office Equipment Program
2
power button. The
E
NERGY
Safety Information
2
3