Epson 400 User Manual page 110

Using the control panel buttons
1. Make sure that the
ink out lights are off.
Note:
If the or
head, and this operation will start the ink cartridge replacement
procedure. If you do not want to replace an ink cartridge at this
moment, press the
to its home position.
2. Hold down the
The printer starts cleaning the print head and the
light begins flashing.
c
Caution:
This operation takes about two minutes to complete. Never
turn off the printer while the
3. When the
from a document, to confirm that the head is clean and to
reset the cleaning cycle.
power light is on and the both and
ink out light is flashing or on, you can not clean the
4
cleaning button to return the print head
4
cleaning button for three seconds.
power light stops flashing, print a few lines
power
power light is flashing.
Troubleshooting
6
6-27