Installing The Printer Software In Windows 3.1 Or Nt 3.5X - Epson 24-PIN DOT MATRIX PRINTER LQ-680 User Manual

24-pin dot matrix printer

Table of Contents

Switch the PC on. Windows starts automatically. Then switch the printer on.

Insert the CD-ROM containing the printer software into the CD-ROM drive.

TheAutoPlay function of the CD-ROM drive automatically starts the installation

program on the CD-ROM.

If the installation program does not start automatically, click on Start and then on

Run. In the Run dialog box, enter the drive letter of your CD-ROM drive in the

command line (e.g. E:\), followed by the command START.EXE (e.g.

E:\START.EXE) and click on the OK button.

Note:

If your CD-ROM drive has a drive letter other than "E", substitute the appro-

priate letter. The installation program starts. The subsequent procedure is

menu-driven, i.e., you can select the relevant options from a list simply by

clicking with the mouse. The remainder of the installation is automatic and you

do not need to enter any more information.

Select the desired options and follow the on-screeen instructions.

After the printer software has been successfully installed, click on the button

identified by a door icon to exit the installation program.

When you install the printer driver on Windows Me, 98, 95, 2000 or NT 4.0, EPSON

Status Monitor 3 will also be installed.

For information on opening and using the software, see Chapter 3, "Using the Printer

Software" in the online User's Guide.