Table of Contents
Advertisement
4.
If a used ribbon cartridge is already installed, squeeze the tabs on each side of the
cartridge, and pull the cartridge out of the printer. Properly dispose the used ribbon
and cartridge.
5.
Turn the ribbon-tightening knob on the new cartridge in the direction of the arrow
to take up any slack in the ribbon.
6.
Hold the ribbon cartridge with the exposed ribbon down and the ribbon-tightening
knob facing you, and guide the ribbon under the print head. Then snap the cartridge
into place so that the tabs on both sides of the cartridge fit into the notches in the
cartridge holder.
10
Setting Up the Printer
Advertisement
Table of Contents
