Attaching The Paper Guide; Plugging In The Printer; Connecting The Printer To Your Computer - Epson 24-PIN DOT MATRIX PRINTER LQ-680 User Manual

Attaching the Paper Guide

To attach the paper guide, slide the slots on the paper guide all the way onto the
mounting pegs in the printer as shown below.

Plugging in the Printer

1.
Make sure the printer is turned off.
2.
Check the label on the back of the printer to make sure its voltage matches that of
your electrical outlet. Also make sure the plug on your printer's power cord
w
matches your electrical outlet.
Warning:
It is not possible to change the printer's voltage. If the rated voltage
and your outlet voltage do not match, contact your dealer for assis-
tance. Do not plug in the power cord.
3.
If the power cord is not attached to the printer, plug the appropriate end into the
AC inlet on the back of the printer.
4.
Plug the power cord into a properly grounded electrical outlet.

Connecting the Printer to Your Computer

Your printer has a standard IEEE-1284 compatible parallel interface connection and an
optional interface.
If your computer requires a different type of printer interface, try one of the Type B
optional interfaces described in Appendix A, "Enhancing Your Printer With Options"
in the online User's Guide.
Follow the steps below to connect the printer to your computer using a parallel interface
connector, or a ground wire connector.
1.
Make sure both the printer and computer are turned off.
12
Setting Up the Printer