Installing Optional Parts - Brother DA-9280 Instruction Manual

11. INSTALLING OPTIONAL PARTS

¡
Installation of optional parts should only be
carried out by a qualified technician.
Needle thread cooler
NAME OF PARTS
q
Thread cooler tank assy
w
Taptite, Cup B M3 12
e
Felt
r
Thread guide
t
Screw, Pan SM 4.37-40 7
y
Silicone oil
r
w
q
CAUTION CAUTION
Q'TY CODE
1 S58045-001
2 087311-215
1 S08761-100
1 S58047-001
2 062680-712
1 S06704-001
e
18mm
t
q
DA-9280
11. INSTALLING OPTIONAL PARTS
¡
Turn off the power switch and disconnect the
power cord before installing any optional
parts, otherwise the machine will operate if the
treadle is pressed by mistake, which could re-
sult in injury.
The parts shown in the illustration at left are necessary
when installing the needle thread cooler.
1. Install the thread cooler tank assembly
r
guide with the two screws
e
2. Insert the felt into the thread cooler tank assembly
q
.
3. Install the thread cooler tank assembly
with the two screws
q
to the thread
w
.
q
to the arm
t
.
21