Table of Contents
Advertisement
Problem
Lots of
interference in
the images
Two cursors
appear
No cursor
appears
No information is
shown after mass
storage device is
set on Thumbnail or
Directory mode.
Can't communicate
Can't communicate
Others
- Information from the
projector to PC is not
correct or completed
- The projector does not
respond
- Image on screen is
freezed
Likely Cause
The compression rate
being used for transferring
the images is too high.
Cursor of the PC and
cursor of the projector
are displayed coming in
succession.
Some PCs do not display
the cursor in MIU MIU Live
Viewer.
The mode setting is not
renewed after the device is
set.
The wireless LAN card isn't
inserted into the projector
or the memory card is still
inserted.
There is closely another
projector or other that has
the same wireless setting.
The PC and/or projector's
network settings are not
configured correctly.
The wireless LAN card is
inserted into the projector.
Communication between
the projector and PC is not
working well.
MIU Functions of the
projector is not working
well.
5. Troubleshooting
Things to Check
Try setting the image
compression to "High."
• You may experience a
drop in speed.
Turn off the cursor
Emulation of MIU MIU Live
Viewer option.
Turn off the cursor
Emulation of MIU MIU Live
Viewer option.
Select either Thumbnail
mode or Directory mode
again, showing PC LESS
Presentation Menu.
Insert the wireless LAN
card that came with your
projector into the module.
Try changing of SSID and
IP Address.
Check both the PC
and projector's network
settings.
Remove the wireless LAN
SD card from the projector
(you can't use both wireless
and wired LAN connections
at the same time).
Try "MIU RESTART"
in MIU SERVICE MENU.
* User's Manual - Operating Guide
Reference
Page
Number
49
48
48
53, 63
*12
24
*54
11-13
*12
*58
81
Advertisement
Table of Contents
