Hitachi CPX608 - XGA LCD Projector User Manual page 37

2.5 Configuring and controlling the projector via a web browser (Continued)
2.5.8 Security Settings (Continued)
Item
Network Control
Authentication
Password
Re-enter Authentication
Password
SNMP
Community Name
FTP
USER
Password
Re-enter Password
Click the [Apply] button to save the settings.
NOTE
• The new configuration settings are activated after restarting the
network connection. The network connection must be restarted when the
configuration settings are changed. The network connection can be restarted
using [Network Restart] on the main menu.
2. Equipment connection and network setting
Configures the Authentication Password for the command
control.
Configures the Authentication Password.
The length of the text can be up to 16 alphanumeric
characters.
Used to re-enter the above password for verification.
Configures the community name if SNMP is used.
Configures the community name.
The length of the text can be up to 64 alphanumeric
characters.
Configures the FTP user and password.
Configures the user name. The length of the text can be up
to  alphanumeric characters.
Configures the password. The length of the text can be up to
 alphanumeric characters.
Use to re-enter the above password for verification.
Description