Utilize "Pc-Less Presentation" - Basic - Hitachi CPX608 - XGA LCD Projector User Manual

3. How to use Projector software – Basics -
3.1 How to use "MIU Live Viewer" (Continued)
(3) Click Capture start button.
Based on the above operation, if captured picture of PC screen is displayed real
time on monitor connected with projector, it is succeeded. Much easier to connect
if you utilize "One-Click-Communication" function. (Refer to section 2.2.)
This is basic usage. Refer to section 4.1 for further explanation of advanced MIU
Live Viewer usage.
3.2 Utilize "PC-LESS Presentation" – Basic -
Explain basics of how to utilize "PC-LESS Presentation".
1) Save JPEG picture files into root directory in SD card or USB Memory. Insert
SD card into SD slot on projector or insert USB memory into AUX I/O slot on
projector (Inserting an SD card and USB memory of the User's Manual - Operating
Guide).
2) Connecting as network refer to section 3 and start the Web Remote Control.
3) Click "THUMBNAIL" button on the Web Remote Control to change projector
mode to "PC-LESS Presentation". Then thumbnail appears.
To remove the SD card or USB memory,
4) Be sure to perform the REMOVE procedure using the SERVICE item in the
MIU menu (MIU Menu of the User's Manual - Operating Guide). When an error
dialog appears in the procedure, please re-perform the procedure after waiting
for a while.
5) When you remove the SD wireless network card, be sure to turn the projector off.
6) Remove the SD card or USB Memory. For removing the SD card, remove the
SD card slot cover before, and put the cover back after.

Fig. 3.1.4.d Start capturing