Printing Your Design; Windows - Epson Stylus Photo R800 User Manual

Printing Your Design

After you have loaded a CD or DVD and created your design, you're ready to print.
Follow the steps for your operating system below.
Caution: Don't open Epson Status Monitor, pause printing, or respond to any
on-screen, low ink messages when your printer is in the middle of a print job. This
may cause your printer to pause and leave an uneven surface on your disc. If your
ink is running low, wait until printing finishes before checking ink levels or
attempting to replace a cartridge. If you must replace an ink cartridge in the
middle of a print job, the quality of your printout may decline. For best results,
check your ink levels and replace ink cartridges, if necessary, before printing on
discs.

Windows

1. Open the File menu and select
Settings.
2. Make sure these settings are selected:
EPSON Stylus Photo R800
the Name
as the Size
Letter
as the Source
Manual
CD/DVD as
3. Click .
OK
4. Open the File menu and select
5. Click . The printer prints your
OK
CD and ejects it on the tray.
Note: After you print, handle the CD
or DVD carefully. To allow the ink to
dry fully, wait at least 24 hours before
playing the disc or inserting it in a drive.
Keep printed discs away from moisture
and direct sunlight.
Printer
as
the Media Type
Print
.
Printing on CDs and DVDs
67