Epson Stylus Photo R800 User Manual page 27

10. For the ink setting, select
photographs) or
11. Select
Automatic
documents or images. (For instructions on using Advanced mode, see page 31.)
12. Move the slider to the
print quality, or to the
Note: For more information about printer settings, click Help. The OS X printer
driver contains a subset of the settings available with the OS 8.6 to 9.x Macintosh
printer driver described in this book.
13. You can also choose these options in the pull-down menu:
Copies & Pages
, to select page layout options
Layout
Output Options
Roll Paper Option
to select roll paper options; see page 35 for details
Color Management
the gamma setting, or turn off color adjustments by the printer software
Expansion
to adjust the borderless image size; see page 43 for details
Extension Setting
envelopes.
, to view a list of all your selections
Summary
14. Click .
Print
Caution: Don't open Epson Status Monitor, pause printing, or respond to any
on-screen, low ink messages when your printer is in the middle of a print job. This
may cause your printer to pause and leave an uneven surface on your printout. If
your ink is running low, wait until printing finishes before checking ink levels or
attempting to replace a cartridge. If you must replace an ink cartridge in the
middle of a print job, the quality of your printout may decline. For best results,
check your ink levels and replace ink cartridges, if necessary, before printing large
or high-resolution print jobs.
(for color documents and black and white
Color
(for black text documents).
Black
as the Mode setting for the best results printing basic
setting to print images or documents using higher
Quality
setting for faster printing.
Speed
, to select the number of copies or a page range
, to save your print job as a PDF file
(if a
Roll Paper
, to select ColorSync,
(if
Sheet Feeder - Borderless
, to correct ink smearing when printing on thick paper or
option is selected as the Printer setting),
®
adjust the color controls, change
is selected as the Printer setting),
Printing From Start to Finish
27