Selecting Fonts - Epson 900 User Manual

6. After making your changes, exit default-setting mode by turning off the printer.
You may exit default-setting mode any time by turning off the
printer. Any changes you have made remain in effect until you
change them again.
If you want to check the current default settings, enter default-setting mode again and
print the current settings. Current settings are indicated with arrows.

Selecting Fonts

Your printer has eight built-in character fonts:
EPSON Courier
EPSON Roman T (similar to the Times
EPSON Sans Serif H (similar to Helvetica
EPSON Roman
EPSON Sans Serif
EPSON Prestige
EPSON Script
Draft
To select a font, enter default-setting mode. See "Changing the Default Settings" on
page 34.
The font selections you make with your software override
your printer's control panel selections. For best results, use
your software to select fonts.
Roman T and Sans Serif H fonts are available in proportionally
spaced fonts only.
Some of the character tables might not be able to print with
EPSON Roman T and EPSON Sans Serif H fonts. In these
cases, selected character tables are printed with EPSON
Roman.
™
font)
™ )
35