Windows System Requirements - Epson 900 User Manual

Windows System Requirements

To use your printer and its software with a PC, your system should have:
An IBM
486/25 MHz (for Windows 95 or Windows NT 4.0), or 486/66 MHz (for
Windows 98) processor
DOS, Microsoft
At least 16MB of RAM (32MB for Windows 95 or 98 or 64MB for
Windows NT 4.0 recommended)
At least 50MB of free hard disk space (100MB recommended)
VGA, Super VGA, or better display adapter and monitor
Double-speed (2
installing the printer software
For parallel connection, a high-speed, bidirectional, IEEE-1284 compliant
parallel cable (6 to 10 feet long); the cable must have a D-SUB, 25-pin, male
connector for your computer and a 36-pin, Centronics
the printer.
For USB connection to a computer running Windows 98 with a Windows 98
compliant USB port, a shielded USB "AB" interface cable, from Series A
(computer) to Series B (printer), up to 6.5 ft. (2.0 meters) long.
4
®
compatible PC with at least a 386/25 (for Windows 3.1x),
®
Windows 3.1, Windows 95, Windows 98, or Windows NT 4.0
) CD-ROM drive (quad [4
x
Using an improperly shielded USB cable—especially a cable
more than 6.5 ft. (2.0 meters) long—may cause the printer to
malfunction.
] or faster recommended) for
x
®
compatible connector for