Macintosh System Requirements - Epson 900 User Manual

Macintosh System Requirements

To use your printer and its software with a Macintosh, your system should have:
One of the following Macintosh models:
LC475, LC575, LC630
Quadra series
Centris series
PowerBook ® series (190, 520, 540, 550, or later)
PowerBook Duo 280, 2300c/100
®
Performa 475, 575, 588, 630, 5210 or later
Power Macintosh
™
iMac series (for USB connection only)
For serial connection: System 7.5.1 or later (7.6 or later recommended)
For USB connection: iMac with System 8.1 or later
At least 16MB of available RAM (32MB recommended)
At least 50MB of free hard disk space (100MB recommended)
RGB display or better
Double-speed (2
installing the printer software
For serial connection, an ImageWriter
DIN male/male, Belkin brand recommended; EPSON part number: F2V024-06)
For USB connection to an iMac computer, a shielded USB "AB" interface cable,
from Series A (computer) to Series B (printer), up to 6.5 ft. (2.0 meters) long.
Using an improperly shielded USB cable—especially a cable
more than 6.5 ft. (2.0 meters) long—may cause the printer to
malfunction.
® series
) CD-ROM drive (quad [4
x
] or faster recommended) for
x
®
II serial cable or equivalent (8-pin mini
5