Figure 15. Installing A Pci Express* X16 Graphics Card - Intel DBS1200KP Product Manual

Follow these instructions to install a PCI Express* x16 graphics card:
1. Observe the precautions in "Before You Begin" on page 18.
2. Place the card in the PCI Express* x16 connector (Figure 15, A) and press down on the card
until it is completely seated in the connector and the card retention notch on the card snaps into
place around the retention mechanism pin on the connector.
3. Secure the card's metal bracket to the chassis back panel with a screw (Figure 15, B).
4. Connect a monitor to the graphics card according to the manufacturer's instructions.
®
Intel Server Board S1200KP Product Guide

Figure 15. Installing a PCI Express* x16 Graphics Card

Installing and Replacing Server Board Components
31