Intel C206 Express Chipset; Main Memory - Intel DBS1200KP Product Manual

®
Intel C206 Express Chipset
®
Intel C206 Chipset with Direct Media Interface (DMI) interconnect provides interfaces to the
processor and the USB, SATA, LPC, LAN and PCI Express* interfaces. The Intel
a centralized controller for the board's I/O paths.

Main Memory

NOTE
1. To be fully compliant with all applicable Intel
specifications, the board should be populated with DIMMs that support
the Serial Presence Detect (SPD) data structure. If your memory
modules do not support SPD, you will see a notification to this effect on
the screen at power up. The BIOS will attempt to configure the memory
controller for normal operation.
2. ECC DIMMs are recommended to use for server system.
The board has two DDR3 DIMM sockets arranged in two channels and supports the following
memory features:

Two independent memory channels with interleaved mode support

Support for ECC and non-ECC DIMMs.

Unbuffered, single-sided or double-sided DIMMs with x8 organization and single-sided
DIMMs with x16 organization

16 GB maximum total system memory (with 4 Gb memory technology)

Minimum total system memory: 512 MB

Serial Presence Detect

Support for DDR3 1066/1333 MHz (with Intel
Generation Intel
V2 Processors or the 3
®
Intel Server Board S1200KP Product Guide
®
Core™ i3 Processors) or DDR3 1333/1600 MHz (with Intel
rd ®
Generation Intel
®
DRAM memory
® ®
Xeon E3-1200 Processors or the 2
Core™ i3 Processors) DIMMs
Server Board Features
®
C206 Chipset is
nd
® ®
Xeon E3-1200
7