4.
Remove the battery (see
5.
Remove the following:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
Display assembly (see
f.
Top cover (see
g.
ExpressCard board (see
h.
Audio board (see
Remove the speaker:
1.
Remove the two Phillips PM2.5×5.0 screws (1) that secure the speaker to the base enclosure.
2.
Remove the speaker (2).
Reverse this procedure to install the speaker.
Battery on page
47).
Hard drive on page
53)
Optical drive on page
Keyboard on page
61)
Switch cover on page
Display assembly on page
Top cover on page
81)
ExpressCard board on page
Audio board on page
56)
66)
75)
84)
85)
Component replacement procedures
89