Rear cover
Description
Rear cover
Before removing the rear cover, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4.
Remove the battery (see
5.
Remove the following:
a.
b.
c.
d.
e.
f.
Remove the rear cover:
1.
Turn the computer upside down, with the rear panel toward you.
2.
Remove the four Torx8 T8M2.5×9.0 screws that secure the rear cover to the base enclosure.
3.
Turn the computer right side up, with the front toward you.
92
Chapter 4 Removal and replacement procedures
Battery on page
Hard drive (see
Hard drive on page
Optical drive (see
Optical drive on page
Keyboard (see
Keyboard on page
Switch cover (see
Switch cover on page
Display assembly (see
Top cover (see
Top cover on page
47).
53)
56)
61)
66)
Display assembly on page
81)
Spare part number
487143-001
75)