Table of Contents
Advertisement
When No Electricity Is Generated at Receptacle:
Check to make sure AC circuit breaker or
AC circuit breaker is in the "ON" position.
Check AC receptacle and DC terminals for
loose connection.
Check to see if engine starting was
attempted with appliances already
connected to generator.
After making sure that the total wattage of the
electrical appliance is within permissible limits
and there are no defects in the appliance,
turn the AC breaker to the "ON" position.
If breakers continue to actuate, consult
your nearest servicing dealer.
Secure connection if necessary.
Turn off switch on the appliance, and
disconnect cable from receptacle. Reconnect
after generator has been started properly.
23
Advertisement
Table of Contents
