Cleaning The Glass Cooktop - GE CBC980 Owner's Manual & Installation Instructions

Radiant self-cleaning convection ranges
Table of Contents

Advertisement

Cleaning the glass cooktop.

Clean your cooktop after
each spill. Use CERAMA
BRYTE® Ceramic Cooktop
Cleaner.
Use a CERAMA BRYTE
Cleaning Pad
®
for Ceramic Cooktops.
The CERAMA BRYTE
®
Ceramic Cooktop
Scraper and all recommended supplies
are available through our Parts Center.
See instructions under "To Order Parts"
section on next page.
NOTE: Do not use a dull or nicked
blade.
38
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
®
Ceramic Cooktop
Cleaner on the glass cooktop. Other creams
may not be as effective.
To maintain and protect the surface of your
glass cooktop, follow these steps:
Before using the cooktop for the first
time, clean it with CERAMA BRYTE
Ceramic Cooktop Cleaner. This helps
protect the top and makes cleanup
easier.
Daily use of CERAMA BRYTE
Cooktop Cleaner will help keep
the cooktop looking new.
Burned-On Residue
WARNING: DAMAGE to your glass surface
may occur if you use scrub pads other than
those recommended.
Allow the cooktop to cool.
Spread a few drops of CERAMA BRYTE
Ceramic Cooktop Cleaner on the entire
burned residue area.
Using the included CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops, rub
the residue area, applying pressure as
needed.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Use a single-edge razor blade scraper
at approximately a 45° angle against
the glass surface and scrape the soil.
It will be necessary to apply pressure
to the razor scraper in order to
remove the residue.
After scraping with the razor scraper,
spread a few drops of CERAMA BRYTE
Ceramic Cooktop Cleaner on the entire
burned residue area. Use the CERAMA
BRYTE
®
Cleaning Pad to remove any
remaining residue.
Shake the cleaning cream well. Apply
a few drops of CERAMA BRYTE
Cooktop Cleaner directly to the cooktop.
Use a paper towel or CERAMA BRYTE
Cleaning Pad for Ceramic Cooktops
to clean the entire cooktop surface.
®
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
®
Ceramic
thoroughly.
If any residue remains, repeat
the steps listed above as needed.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
®
BRYTE
®
and a paper towel.
®
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE
®
and a paper towel.
®
®
Ceramic
Ceramic Cooktop Cleaner
Ceramic Cooktop Cleaner
®

Advertisement

Table of Contents
loading

Table of Contents