Table of Contents
Advertisement
32
Integrated Peripherals
The Integrated Peripherals option changes the values of the chipset
registers. These registers control system options in the computer.
Note:
Change these settings only if you are familiar with the Chipset.
Run the Integrated Peripherals as follows.
1. Choose ÒIntegrated PeripheralsÓ from the Main Menu and the
following screen appears.
settings:)
OnChip IDE First Channel : Enabled
OnChip IDE Second Channel: Enabled
IDE Prefetch Mode
IDE HDD Block Mode
IDE Primary Master PIO
IDE Primary Slave
IDE Secondary Master PIO : Auto
IDE Secondary Slave
IDE Secondary Master UDMA: Auto
IDE Secondary Slave
Onboard FDC Controller
Onboard UART 1
Onboard UART 2
Onboard UART 2 Mode
Onbaord Parallel Port
Parallel Port Mode
ECP Mode Use DMA
Parallel Port EPP Type
2. Use the arrow keys to move between items and select values.
Modify selected fields using the PgUp/PgDn/+/Ð keys.
A short description of screen items follows:
On-chip IDE First
Channel/
On-chip IDE Second
Channel
IDE Prefetch Mode
IDE HDD Block Mode
ROM PCI/ISA BIOS
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
: Enabled
: Enabled
: Auto
PIO
: Auto
PIO : Auto
UDMA: Auto
: Enabled
: 3F8/IRQ4
: 2F8/IRQ3
: Standard
: 378/IRQ7
: ECP+EPP
: 3
: EPP1.9
Enabled Ð Use the on-board IDE
Disabled Ð Turn off the on-board IDE
Use the default setting.
Choose Enabled (default) or Disabled.
Enabled invokes multi-sector transfer
instead of one sector per transfer. Not all
HDDs support this function.
(The screen below shows default
ESC : Quit
F1
: Help
PU/PD/+/– : Modify
F5
: Old Values (Shift)F2 : Color
F6
: Load BIOS Defaults
F7
: Load Setup Defaults
(default)
BIOS Setup
: Select Item
Hide quick links:
Advertisement
Table of Contents
