Quick Bios Setup - SOYO SY-P4I845PE User Manual

Hardware Installation
Repeat this operation until you get the following screen.
3. The BIOS Setup screen appears:
CMOS Setup Utility – Copyright ( C ) 1984-2002 Award Software
SOYO COMBO Feature
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
Esc : Quit
F10 : Save & Exit Setup

2-3 QUICK BIOS SETUP

This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO FEATURE]. The [SOYO COMBO FEATURE]
combines the main parameters that you need to configure, all in one menu,
for a quick setup in BIOS.
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will be shown
on the screen. Then, follow these steps to configure the CPU settings.
Select [STANDARD CMOS SETUP]
Step1.
Set [Date/Time] and [Floppy drive type], then set [Hard Disk Type] to
"Auto".
Select [LOAD OPTIMIZED DEFAULTS]
Step2.
Select the "LOAD OPTIMIZED DEFAULTS" menu and type "Y" at the
Change CPU's Clock & Voltage
33
SY-P4I845PE
PC Health Status
Load Fail - Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item