Interface Setup Commands - Epson Twinax C82315 User Manual

For example, you
turn on bold printing, as used in the example in the previous section. Then,
instead of inserting the &% 1B 45&% command in your text, you would insert only
&%U1.

INTERFACE SETUP COMMANDS

You send these commands in a similar manner to command-pass-thru, but the
commands are used to make interface settings instead of being sent on to the
printer. These interface settings control printing regardless of the printer model
connected.
The format of the interface setup commands is as follows:
The 8%Z indicates that an interface setup command follows. The ## is a two-digit
number, indicating the number of the command. The P is the parameter of the
command: the length of the parameter varies by command.
A table of commands and parameters, as well as a short description of each
follows.
could
define user-defined string 1 to be the command string to
&%Z##,P
11