Rear - Sony UP-DR80MD Instructions For Use Manual

G Indicators
The indicators are as shown below:
A CLEANING indicator
Lights while cleaning is in progress.
B RIBBON/PAPER indicator
Lights when an error involving the ink ribbon or
paper occurs.
C ALARM indicator
Lights when an error such as a paper jam occurs.
D PRINT indicator
Lights while printing is in progress.
The location and cause of an error can be determined
according to which of the indicators (PRINT,
ALARM, RIBBON/PAPAER and CLEANING) are
on or flashing. For details, refer to "Explanation of
Indicators" on page 23.
H STOP button (page 17)
Press this button to stop a continuous printing
operation.
When this button is pressed, the printer returns to
ready state after the current page is printed and
ejected.

Rear

A
USB connector
Connects to a computer equipped with the USB
interface (which conforms to USB 2.0), using a USB
cable (supplied).
B
Equipotential ground terminal connector
Used to connect to a ground (equipotential) plug to
bring the various parts of the system to the same
potential.
C Vent openings
D ~AC IN connector (page 10)
Use the power cord provided.
E Security slot
Used to attach a security cable.
F USB cable stopper (page 10)
Fixes the USB cable to prevent it from being
disconnected.
Location and Function of Parts and Controls
9