Specifications - Sony XR-1853MK2 Operating Instructions Manual

Specifications

Cassette player section
Tape track 4-track 2-channel stereo
Wow and flutter 0.2 % (WRMS)
Frequency response 50 – 15,000 Hz
Signal-to- noise ratio 50 dB
Tuner section
FM
Tuning range FM1: 65 – 74 MHz
FM2: 87.5 – 108 MHz
Antenna terminal External antenna connector
Intermediate frequency 10.7 MHz
Usable sensitivity 12 dBf
Selectivity 65 dB at 400 kHz
Signal-to-noise ratio 55 dB (stereo), 60 dB
(mono)
Harmonic distortion at 1 kHz
1.5 % (stereo), 1.0 %
(mono)
Separation 25 dB at 1 kHz
Frequency response 30 – 15,000 Hz
Capture ratio 9 dB
MW/LW
Tuning range MW: 522 – 1,611 kHz
LW:153 - 281 kHz
Antenna terminal External antenna connector
Intermediate frequency 450 kHz
Sensitivity MW: 35 µV
LW: 40 µV
Power amplifier section
Outputs Speaker outputs
(sure seal connectors)
Speaker impedance 4 – 8 ohms
Maximum power output 20 W
Actual total number:
General
Output lead
Tone controls
Power requirements
Dimensions
Mounting dimension
Mass
Supplied accessories
Design and specifications are subject to change without
notice.
4 (at 4 ohms)
Sony XR-1853MK2 (E, Po, Bu, Hu, R) 3-856-560-11 (1)
Power antenna relay
control lead
12 dB at 10 kHz
12 V DC car battery
(negative ground)
Approx. 188 58 170 mm
(w/h/d) not incl.
projecting parts and
controls
Approx. 182 53 165 mm
(w/h/d) not incl.
projecting parts and
controls
Approx. 1.5 kg
Mounting hardware (1 set)
9
EN