Specifications - Sony XR-7070 Operating Instructions Manual

Specifications
AUDIO POWER SPECIFICATIONS
harmonic distortion.
Other Specifications
Power amplifier section
Outputs Speaker outputs
(sure seal connectors)
Speaker impedance .
3.2-—8 ohms
Maximum power output
20 W x4 (at 4 ohms)*
*Measured at 14.4 V
Cassette player section
Tape track 4-track 2-channel stereo
Frequency response
30 - 18,000 Hz
Signal-to-noise ratio
Cassette j ae
type coy : pay ot :
TYPE Il, IV 66 dB 58 dB
TYPE | 63 dB 55 dB |
Wow and flutter 0.13% (WRMS)
Tuner section
FM
Tuning range
Antenna terminal
87.9 - 107.9 MHz
External antenna connector
Intermediate-frequency
10.7 MHz
Usable sensitivity
12 dBf (75 ohms)
Selectivity 75 dB at 400 kHz
Signal-to-noise ratio
65 dB (stereo), 70 dB (mono)
Harmonic distortion at 1 kHz
0.5% (stereo), 0.3% (mono)
Separation 35 dB at 1 kHz
Frequency response.
30 — 15,000 Hz
Capture ratio 2 dB
AM
Tuning range
Antenna terminal
External antenna connector
Intermediate frequency
450 kHz
Sensitivity 35nV
530 — 1,710 kHz
General
Output lead Power antenna relay control lead
Power amplifier control lead
Bass +10 dB at 100 Hz
Treble +10 dB at 10 kHz
+6 dB at 100 Hz
+6 dB at 10 kHz
Power requirements
12 V DC car battery (negative
ground)
Dimensions (without bracket)
Approx. 178 x 50 x 167 mm (w/h/d)
(7"lg x 2 x 65/, inches)
not incl. projecting parts and
controls
Mounting dimensions
Approx. 182 x 53 x 145 mm (w/hid)
(711, x 2", x 55/, inches)
not incl. projecting parts and
controls
Weight Approx. 2 kg (4 Ib. 7 02.)
Accessories supplied
Mounting hardware (1 set)
Tone controls
Loudness
Design and specifications subject to change without
notice.
2]