Specifications; Troubleshooting - Sony RDP-X500iP Reference Manual

Tip
Playing an iPod
 The Reaction indicator flashes three times
when the volume is set to either maximum or
minimum volume.
Compatible iPod models
The compatible iPod models are as follows.
Update software of your iPod to the latest version Connecting optional
before using it with this unit.
components
iPod touch (4th generation)
iPod touch (3rd generation)
You can enjoy the sound from an optional
iPod touch (2nd generation)
component, such as a portable digital music
iPod nano (6th generation)*
player, through the speakers of this unit. Be sure
iPod nano (5th generation)
to turn off the power of each component before
iPod nano (4th generation)
making any connections.
iPod nano (3rd generation)
1
Firmly connect the line output jack of a
iPod classic
portable digital music player (or other
iPhone 4
iPhone 3GS
component) to the AUDIO IN jack on the
iPhone 3G
back of the unit, using a suitable audio
iPad 2
connecting cable (not supplied).
iPad
2
Press  to turn on the unit.
* T he iPod nano (6th generation) cannot be
controlled by the remote when the command of 3
Turn the connected component on.
"MENU, " ", " ", " and "ENTER" is pressed.
4
Press AUDIO IN to select the source.
On copyrights
5
Play the connected component.
iPad, iPhone, iPod, iPod classic, iPod nano, and
The sound from the connected component is
iPod touch are trademarks of
output from the speakers of this unit.
Apple Inc., registered in the U.S. and other
countries.
Notes
"Made for iPod, " "Made for iPhone, " and "Made
 The audio connecting cable required depends
for iPad" mean that an electronic accessory
on the external equipment. Make sure the cable
has been designed to connect specifically to iPod,
is correct for the external equipment to be
iPhone, or iPad, respectively, and has been
connected.
certified by the developer to meet Apple
 If the volume is low, adjust the volume level on
performance standards. Apple is not responsible
the connected equipment first. If the volume is
for the operation of this device or its compliance
still too low, adjust the volume level on the unit.
with safety and regulatory standards. Please note
that the use of this accessory with iPod, iPhone,
or iPad may affect wireless performance.
About App
To set an iPod on the Docking
A dedicated dock app for iPod touch, iPhone, and
Tray
iPad available at Apple App Store.
1 Search for "D-Sappli" and download the free app
Press the Docking Tray on the front of
to find out more about the functions.
the unit to open it.
Features
2
Set your iPod on the Dock connector.
 The Sound EQ function allows you to create
your own equalizer settings. You can select
equalizer presets, or customize settings to your
taste.
This function is available only when the iPod
touch/iPhone/iPad is set on the Dock
connector.
Note
 If a pop-up message appears on the display of
the iPod touch/iPhone/iPad, see "About App. "
To close the Docking Tray
1
Remove the iPod from the Dock
connector.
 D-Sappli includes two timer functions: Music
2
Press the Docking Tray on the front of
Play Timer and Sleep Timer.
the unit until it is locked. The Music Play Timer allows you to play/pause
desired music at a desired time. The Sleep
To play back
Timer allows you to specify a time at which to
stop music playback. The Music Play Timer and
Press .
Sleep Timer work in combination with the
The iPod begins to play back.
power supply of the unit.
You can operate the connected iPod via this unit
 D-Sappli also includes a clock display enlarge
or the iPod itself.
feature.
Notes
Notes
 Remove the case or cover from your iPod
 If the App to link with this unit is not
before setting it in the Docking Tray to ensure a
downloaded to your iPod touch/iPhone/iPad, a
stable connection.
pop-up message prompting you to download
 When placing or removing the iPod, hold the
D-Sappli may appear repeatedly.
iPod at the same angle as that of the connector
Deactivate the App's link function to stop the
on this unit, and do not twist or bend the iPod
pop-up message.
as it may result in connector damage.
 To deactivate the App's link function: Connect
 Do not carry the unit with an iPod set on the
the AC adaptor, and then press / to turn on
Docking Tray. Doing so may cause a
the unit. Remove your iPod touch/iPhone/iPad
malfunction.
from the Dock connector, and then press and
 When placing or removing the iPod, hold the
hold VOLUME − and  simultaneously for
Docking Tray securely.
more than 2 seconds. (The indicator for iPod
 Before disconnecting the iPod, pause playback.
flashes rapidly when deactivated.)
 If the battery of your iPod is extremely low,
 To re-activate the App's link function, repeat the
charge it for a while before operation.
above steps. The indicator for iPod will flash
 Sony cannot accept responsibility in the event
slowly.
that data recorded to an iPod is lost or damaged
 When you remove the iPod touch/iPhone/iPad
when using an iPod connected to this unit.
from the docking tray, the Sound EQ function
 For details of environmental conditions for
setting will return to the default.
operating your iPod, check the website of Apple
 When the sound volume is high, the Sound EQ
Inc.
function may not be effective.
To adjust the volume
Press VOLUME +/− (VOL +/− on the remote
commander).
Additional Information

Specifications

AUDIO POWER SPECIFICATIONS

Troubleshooting

POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8 ohm loads Satellite channels and with 4
General
ohm loads Subwoofer channel driven, from
100 Hz - 10,000 Hz; rated 10 watts per channel
The power does not turn on when the AC
minimum RMS power, with no more than 10%
adaptor is connected.
total harmonic distortion.
Make sure the AC adaptor is connected to the wall outlet

firmly. Section for iPod
There is no audio.
DC out: 5 V
Adjust VOLUME +/− (VOL +/− on the remote
 MAX: 2.1 A
commander).
General
Noise is heard.
Ensure that the unit is not in the vicinity of in-use Speaker

portable phones, etc.
Satellite: 4.8cm (1
Resetting the unit (default setting).
Subwoofer: 9.0cm (3
Press / to turn on the unit. Remove your iPod from the

Input
Dock connector, and then while holding down VOLUME
AUDIO IN jack (ø 3.5 mm stereo minijack)
−, hold down /. (Hold both buttons down for at least 5
seconds.) After resetting, the / indicator flashes for 2 Power output
seconds.
15 W + 15 W + 30 W (at no more than 10%
All indicators flash and no buttons can be
harmonic distortion)
operated.
Power requirements
Remove the AC adaptor and connect it again.

DC IN 19.5 V
iPod Dimensions
Approx. 401 mm × 176 mm × 160 mm (w/h/d)
There is no audio.
(15 / inches × 7 inches × 6
7
8
Make sure the iPod is connected firmly.

Mass
Update your iPod to use the latest software beforehand.

Approx. 3.15 kg (6 lb 15 oz)
Make sure the iPod is compatible.

Supplied accessories
Make sure the function for iPod is selected.

Remote commander (1)
Operation is not performed.
AC adaptor (1)
Make sure the iPod is connected firmly.

AC power cord (1)*
The iPod does not charge.
Reference Guide (this document) (1)
Make sure the iPod is connected firmly.

Startup Guide (1)
Make sure the AC adaptor is connected firmly.

CR2025 lithium battery (1) (Pre-installed in the
AUDIO IN
remote commander for trial use)
There is no audio.
* T he supplied AC power cord may differ to the
Make sure the audio connecting cable is connected

illustration depending on the country.
firmly.
Make sure the AUDIO IN function is selected.

Design and specifications are subject to change
The sound is low.
without notice.
Confirm the volume of the connected external

component.
Remote commander
The remote commander does not function.
Replace the battery in the remote commander with a new

one if it is weak.
Make sure that you are pointing the remote commander

at the remote sensor on the unit.
Remove any obstacles in the path of the remote

commander and the unit.
Make sure the remote sensor is not exposed to strong

light such as direct sunlight or fluorescent lamp light.
Move closer to the unit when using the remote

commander.
If the problem persists, consult your nearest Sony dealer.
/ inches) dia. 8Ω
15
16
/ inches) dia. 4Ω
5
8
/ inches)
3
8