Freezer
compartment
lamp
Freezer
compartment
shelf
Door rack and
support
ice storage
bin
After dispenser
is used
How to remove and replace parts
To remove the lamp cover, separate the shelf
over the lampcover and pull the lamp cover
forwards @) w hile pressing the bottom side of
the lamp cover upwards d_.Turn the bulb
counterclockwise.
Use a 40-watt bulb (max.)which can be purchased
at a service center.
To remove a shelf, push the shelf to the left (b,
lift the left part of the shelf a bit ®, lift the right
part up ®, and take it out.
Lift the door rack holding both sides (b and
pull it out ®.
Hold the ice storage bin as shown in the right
figure and pull it out ® while slightly lifting it 0.
=Do not dismantle the ice storage bin unless
it is necessary.
=Use both hands to remove the ice bin to avoid
dropping it.
The water collector has no self-draining
function. It should be cleaned regularly.
Remove the cover by pulling the front side of
water collector cover and dry it with a cloth.
\